| Laser, TIG and HF Mills | Quick
Change Systems | Accumulators |
Accumulators
To be blunt, at the front of the line, the consistent and continuous operation of your mill depends on the opposite. You must have the flexibility to handle speed fluctuations and complete mill stops, without disrupting the pace and flow of forming, welding, cutting and bundling of the rest of your process.
No other accumulator gives you this smooth operational autonomy than that from T&H
Lemont. We sought out the best technology possible to yield the most important benefit for this equipment.
An integrated programmable controller determines the strip processing and feed timing, not the operator. And the simplicity of operation is built into every element of our design.
Maximum strip storage along with separate fill/pull speed controls allows for loading and splicing of new coils
independent of the speed and timing of the line, even continuing to load at a rapid
pace while the rest of the mill is stopped.
The delicate flexibilities of our accumulators do not surrender precision over time. Ours are built with the most rugged of mill environments in mind, and their performance on the day you install them is assured for many years to come. Ease of maintenance and repair is an additional relief for more than just the operator, but for maintenance all the way up to the boardroom and to those that watch the bottom line -
T&H Lemont accumulators are synonymous with the start of worry-free mill operations.
Horizontal Strip Accumulators
|
Model |
OD (in)
Min |
OD (in)
Max |
Wall Thickness (in) Min |
Wall Thickness (in) Max |
Line Speed (FPM) Max |
Special Comments |
|
280/3.2 |
0.500" |
3.500" |
0.028" |
0.134" |
600 |
Rollertable type with conventional
loop |
|
280/4 |
0.500" |
3.500" |
0.040" |
0.160" |
400 |
|
350/4 |
0.750" |
4.250" |
0.040" |
0.160" |
500
|
Rollertable type with conventional
loop |
|
400/5
|
1.000"
|
5.000"
|
0.040"
|
0.200"
|
450
|
|
600/7
|
1.500"
|
7.500"
|
0.060"
|
0.280"
|
400
|
|
700/9.5
|
3.000"
|
8.625"
|
0.080"
|
0.375"
|
300
|
|
850/10
|
3.500"
|
10.750"
|
0.100"
|
0.400"
|
300
|
|
1100/16
|
4.500"
|
12.750"
|
0.120"
|
0.625"
|
250
|
Rollertable type with conventional
loop; inner tower driven.
|
|
1600/16
|
6.000"
|
16.000"
|
0.120"
|
0.625"
|
200
|
|
2000/16
|
8.625"
|
24.000"
|
0.188"
|
0.625"
|
150
|
|
2000/19
|
8.625"
|
24.000"
|
0.188"
|
0.750"
|
150
|
|
OPTIONS:
|
|
1) Turning basket for sizes up to and including
600/7
|
|
2) Hydraulic power pump for sizes up to and
including 600/7
|
|
3) Pit-less pinchroll for sizes up to and
including 600/7
|
|
4) Automatic tail-out sequence using encoder for
existing uncoiler (all sizes - higher accuracy)
|
|
5) Automatic tail-out sequence using photo-eye for
existing uncoiler (all sizes - higher accuracy)
|
|
6) Coil end detector (all sizes) mounted to
existing flattener (requires auto tail-out sequence also)
|
|
7) Localized grease header blocks (for parts
inside outer diameter) for sizes up to and including 600/7
|
|
8) Screw adjustments for the twist/detwist stands
for sizes up to and including 600/7
|
|
Note: Some options may not be
available for all sizes and are Customer (i. e. plant, location dependant)
|
| Laser, TIG and HF Mills | Quick
Change Systems | Accumulators |